Kanthal® Super sizes and shapes
Kanthal® Super MoSi2 heating elements are available as straight or bent elements in a wide range of sizes and shapes. The most commonly used design is a two-shank "U"-shaped element. The heating zone is welded to terminals which normally have a diameter double that of the heating zone. The two-shank element can be bent 45° or 90° either in the heating zone or in the terminals.
We also provide special designed elements according to customer needs.
Information
Straight terminals
Element bent 90° at the terminals
Element bent 90°
Element bent 45°at the terminals
Four-shank element for horizontal use
Standard sizes
The table shows standard sizes for Kanthal® Super MoSi2 heating elements.
| Element size Heating zone diameter/Terminal diameter |
|||||
|---|---|---|---|---|---|
| Grade | 3/6 | 4/9 | 6/12 | 9/18 | 12/24 |
| Kanthal Super 1700 |  |
|
 |
|
|
| Kanthal Super 1800 | |
|
|
|
|
| Kanthal Super 1900 | |
|
|
* |
|
| Kanthal Super RA | |
|
|
|
|
| Kanthal Super ER | |
|
|
|
|
| Kanthal Super HT | |
|
|
|
|
| Kanthal Super NC | |
|
|
|
|
* 9/12/18
Element shapes
Kanthal Super MoSi2 heating elements can be delivered in a wide range of shapes. Below please find examples of some common shapes. Other shapes are available on request.
| Element size d/c |
a* mm (inch) |
f mm (inch) |
k90° mm (inch) |
k45° mm (inch) |
m mm (inch) |
n* mm (inch) |
|---|---|---|---|---|---|---|
| 3/6 | 25 (1.0) | 25 (1.0) | 19 (0.75) | 9 (0.35) | 30 (1.18) | 42 (1.65) |
| 4/9 | 25 (1.0) | 25 (1.0) | 19 (0.75) | 9 (0.35) | 35 (1.38) | 47 (1.85) |
| 6/12 | 50 (1.97) | 45 (1.8) | 47 (1.85) | 24 (0.94) | 60 (2.36) | 90 (3.55) |
| 9/18 | 60 (2.36) | 75 (3.0) | 71 (2.8) | 35 (1.38) | 90 (3.71) | 135 (5.31) |
| 12/24 | 80 (3.15) | 100 (4.0) |
* Standard value
