Nickel DH is a nickel alloy (Ni alloy) with a minimum nickel content of 99.2 % suitable for use at temperatures up to 600°C (1100°F).
Typical applications for Nickel DH are lamp filaments filters and many industrial and laboratory equipment where there is need for good corrosion resistance. It is also often used as a resistor when high variation of resistance with temperature is required.
Chemical composition
| Si % | Fe % | Mn % | Ni % | |
|---|---|---|---|---|
| Nominal composition | ||||
| Min | 99.2 | |||
| Max | 0.2 | 0.4 | 0.3 | - |
Mechanical properties
| Diameter | Yield strength | Tensile strength | Elongation | Hardness |
|---|---|---|---|---|
| Ø | Rp0.2 | Rm | A | |
| mm (in) | MPa (ksi) | MPa (ksi) | % | Hv |
| 0.50 (0.02) | 250 (36) | 450 (65) | 30 | 100 |
Physical properties
| Density g/cm3 (lb/in3) | 8.9 (0.322) |
|---|---|
| Electrical resistivity at 20°C Ω mm2/m (Ω circ. mil/ft) | 0.09 (54.1) |
| Temperature °C | 20 | 100 | 200 | 300 | 400 | 500 | 600 |
|---|---|---|---|---|---|---|---|
| Temperature °F | 68 | 212 | 392 | 572 | 752 | 932 | 1112 |
| Ct | 1.00 | 1.40 | 2.08 | 2.97 | 3.81 | 4.23 | 4.65 |
| Temperature °C (°F) | Thermal Expansion x 10-6/ K (10-6 /°F) |
|---|---|
| 20 - 100 (68-212) | 13.3 (7.4) |
| Temperature °C (°F) | 100 (212) |
|---|---|
| W m-1 K-1 (Btu h-1ft-1°F-1) | 70 (40.5) |
| Temperature°C (°F) | 20 (68) |
|---|---|
| kJ kg-1 K-1 (Btu lb-1 °F-1) | 0.48 (0.11) |
| Melting point °C (°F) | 1450 (2642) |
|---|---|
| Max continuous operating temperature in air °C (°F) | 600 (1112) |
| Magnetic properties | The material is magnetic up to approx 360°C (680°F)(the Curie point) |
