The page could not be found

This page you are trying to reach doesn't seem to exist. This is probably a result of a bad or outdated link. We apologize for any inconvenience.

What you can do

  • Check the address for proper spelling. If it looks misspelled you can try to correct it.
  • Use the search function on this page or via the search page.
  • Try navigating from "Home" or any of the links in the navigation above.
  • View the sitemap to get an overview of this website.

115 hits

115 hits on ”_408b6dce 5f63 4e6f 9444 ab3a4135ebba&_t_hit.pos=20” in entire website

Nikrothal® 20

Nikrothal® 20 is an austenitic nickel-chromium alloy (NiCr alloy) for use at temperatures up to 1050°C (1920°F). The alloy is characterized by high resistivity ... ductility after use and excellent weldability. Typical applications for Nikrothal® 20 are terminals attached to nickel-chromium heating elements, element fasteners

Nikrothal® 80/20 Cb

Nikrothal® 80/20 Cb is an austenitic nickel-chromium alloy (NiCr alloy) with addition of niobium. It is characterized by high mechanical strength and suitable ... temperatures up to 1200°C (2192°F). Typical applications for Nikrothal® 80/20 Cb are as wire in mesh belts. An austenitic nickel-chromium alloy (NiCr alloy)

Cuprothal®

thermocouples and compensating cables: E, J, T and KCB (VX). Cuprothal® can be used at temperatures down to 20 K where its Seebeck coefficient is about 8 ... generators (thermopiles). Cuprothal® type T is matched with electrolytic copper (ASTM standard B3). Thermocouple type T is both used in laboratory and industrial

Cuprothal®

thermocouples and compensating cables: E, J, T and KCB (VX). Cuprothal® can be used at temperatures down to 20 K where its Seebeck coefficient is about 8 ... generators (thermopiles). Cuprothal® type T is matched with electrolytic copper (ASTM standard B3). Thermocouple type T is both used in laboratory and industrial

Formulas for values in tables.pdf

4 [19] R20/m = ρ · 4 π · d2 [1’] R20/m = ρ b · t [1’] R20/m = ρ 0.92 · b · t [1’] FORMULAS FOR VALUES IN TABLES In chapter Tables values ... volume · γ = q · l · γ  mm = q · γ Wire mm = b · t · γ [19] Strip Ribbon mm = 0.92 · b · t · γ [19] Surface area per meter, AC/m cm 2/m Based

Key data for Kanthal® elements

d, mm 2.0 – 6,5 2.0 – 5.0 1.0 – 6.5 ≥ 5.0 2.0 – 5.0 ≥ 5.0 Strip thickness, t, mm – – – – – – Strip width, w, mm – – – – – – Outer coil diameter, D, mm 12 – 14 ... temperature, kW/m2 60 60 60 20–40 Max. surface load at 1000°C furnace temperature, W/cm2 5–6 5–6 5–6 3–4 Strip thickness, t, mm 2.0–3.0 2.0–3.0 2.0–3.0

Jesper Ejenstam, Kanthal’s Head of R&D: Don’t underestimate the impact of electric heating

Jesper Ejenstam, Vice President and Head of R&D, Kanthal, about how electric heating supports the industry’s shift towards more sustainable ... sustainable production, electric heating JESPER EJENSTAM, KANTHAL'S HEAD OF R&D: DON'T UNDERESTIMATE THE IMPACT OF ELECTRIC HEATING Jesper Ejenstam, Vice President

Symbols, formulas and definitions

List of symbols Unit for calculation Symbol Meaning Metric Imperial AC Surface area of heating conductor cm2 in2 b Width (ribbon ... temperature Ω Ω R20 Resistance at room temperature (20°C, 68°F) Ω Ω s Pitch mm in t Thickness (ribbon or strip) mm in T Temperature K, °C K, °F U Voltage V V α Temperature

Is this the world’s fastest pizza?

precise temperature that we could easily control.” To make sure that we didn’t just make a fast pizza, but a fast and truly great one, we contacted one of ... using electromagnetic radiation to heat up the object it hits: the pizza in this case. “I didn’t care so much about what it looked like,” he says. “Basically

Increased productivity in heat treatment industry

running to schedule 24 hours per day without any unexpected down-time. Grupo T.T.T., in the Bilbao area of Spain, is a group of companies specialized in heat ... treatment of metals. THE CHALLENGE One of their plants, Tratamientos Térmicos T.T.T., S. A., is equipped with 15 different furnaces, among them four sealed quench