12 hits
12 hits on ”bond xts” in entire website
Thermal spraying wire for high-temperature corrosion protection,
bonding layers, build-up coating and sealing.
1350 Aluminum has a purity of 99-99.5%. 1350 Al ... coils, development of tethers with heat-resistant enamels and high-strength
bond coatings.
1350 Aluminum has a purity of 99-99.5%. 1350 Al is widely used ... coils, development of tethers with heat-resistant enamels and high-strength
bond coatings.
Kanthal® SW 806 is an austenitic nickel-aluminium alloy (NiAl alloy) for use in arc and flame spray systems. The alloy produces ... spray systems. The alloy produces dense, well
bonding coatings.
Typical applications for Kanthal® SW 806 are
bond coats, as protective coatings against high-temperature
Kanthal® SW 030 is a ferritic iron-chromium-aluminum alloy (FeCrAl alloy) for use in arc and flame spray systems. The alloy ... produces dense, well
bonding coatings, resistant to high-temperature oxidation and corrosion.
Typical applications for Kanthal® SW 030 are
bond coats in high-temperature
Kanthal® SW 100 is a ferritic iron-chromium-aluminum alloy with addition of Yttrium (FeCrAlY alloy) for use in arc and flame ... produces dense, well
bonding coatings, resistant to high-temperature oxidation and corrosion.
Typical applications for Kanthal® SW 100 are
bond coats in high-temperature
Kanthal® SW 010 is a ferritic iron-chromium-aluminum alloy (FeCrAl alloy) for use in arc and flame spray systems. The alloy ... produces dense, well
bonding coatings, resistant to high-temperature oxidation and corrosion.
Typical applications for Kanthal® SW 010 are
bond coats in high-temperature
Kanthal® SW 210 is an austenitic nickel-iron-chromium alloy (NiFeCr alloy) for use in arc and flame spray systems. The alloy produces dense, ... for use in arc and flame spray systems. The alloy produces dense, well
bonding coatings resistant to high-temperature oxidation and corrosion.
Typical
Kanthal® SW 821 is an austenitic copper-nickel alloy (CuNi alloy) for use in arc and flame spray systems. The alloy produces dense, well ... for use in arc and flame spray systems. The alloy produces dense, well
bonding coatings which are resistant against corrosion.
Kanthal® SW 821 is typically
Kanthal® SW 230 is an austenitic iron-nickel-chromium alloy (FeNiCr alloy) for use in arc and flame spray systems. The alloy produces dense, ... for use in arc and flame spray systems. The alloy produces dense, well
bonding coatings resistant to high-temperature oxidation.
Typical applications for
Kanthal® SW 200 is an austenitic nickel-chromium alloy (NiCr alloy) for use in arc and flame spray systems. The alloy produces dense, well bonding ... for use in arc and flame spray systems. The alloy produces dense, well
bonding coatings resistant to high-temperature oxidation and corrosion.
Typical