Thermocouple wire and strip

Thermocouple wire and thermocouple strip for use at temperatures up to 1260°C (2300°F). Kanthal thermocouple wire is supplied with bright or oxidized surface according to standard or special EMF requirements.

Each individual arm is calibrated against platinum and the EMF values are shown on each coil or spool.

Sandvik's product program for thermocouples includes:

Kanthal thermocouple alloys - ENGLISH (PDF document, 388 kB)

Kanthal thermocouple alloys - JAPANESE (PDF document, 1.6 MB)

Kanthal thermocouple alloys - CHINESE (PDF document, 1.2 MB)

Kanthal thermocouple alloys - KOREAN (PDF document, 2.2 MB)

Kanthal thermocouple protection tubes (PDF document, 228 kB)

Our program also includes a bi-filar side-by-side configuration in some size ranges.

Types of thermocouple wire

Code +Positive leg -Negative leg
N Nicrosil (NP) Nisil (NN)
K Thermothal P (KP) Thermothal N (KN)
E Thermothal P (EP) Cuprothal (EN)
J Iron (JP) Cuprothal (JN)
T Copper* Cuprothal (TN)

*Not produced by Sandvik

The most used thermocouple combinations

Size range

Wire: Kanthal thermocouple wire ranges from 0.05 to 8.0 mm (0.0019 to 0.315 inch). Thermocouple wire in the size range 0.0254 mm to 0.51 mm (0.001 to 0.0201 inch) can be supplied with or without an insulating coating.

Strip: Standard sizes for thermocouple strip range from thickness 0.10 to 3.0 mm (0.0039 to 0.181 inch) and width from 4 to 195 mm (0.157 to 7.68 inch).

Standards

Kanthal thermocouple alloys are supplied according to the following standards shown below. Where older standards are still in use (which are not equivalent to those listed below), we can supply different EMF values upon request.

ASTM (American Society for Testing and Materials) E 230
ANSI (American National Standard Institute) MC 96.1
IEC (European Standard by the International Electrotechnical Commission 584)-1/2/3
DIN (Deutsche Industrie Normen) EN 60584 -1/2
BS (British Standards) 4937.1041, EN 60584 - 1/2
NF (Norme Française) EN 60584 -1/2 - NFC 42323 - NFC 42324
JIS (Japanese Industrial Standards) C 1602 - C 1610
GOST (Unification of the Russian Specifications) 3044

Thermocouple tubes

Sandvik provides a wide range of thermocouple protection tubes.
Go to thermocouple tubes