Thermocouple wire and strip
Thermocouple wire and thermocouple strip for use at temperatures up to 1260°C (2300°F). Kanthal® thermocouple wire is supplied with bright or oxidized surface according to standard or special EMF requirements.
Each individual arm is calibrated against platinum and the EMF values are shown on each coil or spool.
Kanthal®'s product program for thermocouples includes:
- Thermocouple wire - round and flat
- Thermocouple strip
- Thermocouple extension leads/extension cables
- Thermocouple compensating cables
- Bunched wire
- Thermocouple protection tubes
Our program also includes a bi-filar side-by-side configuration in some size ranges.
Types of thermocouple wire
|Code||+Positive leg||-Negative leg|
|N||Nicrosil (NP)||Nisil (NN)|
|K||Thermothal KP||Thermothal N (KN)|
|K||Thermothal KM||Thermothal N (KN)|
|E||Thermothal P (EP)||Cuprothal (EN)|
|J||Iron (JP)||Cuprothal (JN)|
*Not produced by Sandvik
Wire: Kanthal® thermocouple wire ranges from 0.05 to 8.0 mm (0.0019 to 0.315 inch). Thermocouple wire in the size range 0.0254 mm to 0.51 mm (0.001 to 0.0201 inch) can be supplied with or without an insulating coating.
Strip: Standard sizes for thermocouple strip range from thickness 0.10 to 3.0 mm (0.0039 to 0.181 inch) and width from 4 to 195 mm (0.157 to 7.68 inch).
Kanthal® thermocouple alloys are supplied according to the following standards shown below. Where older standards are still in use (which are not equivalent to those listed below), we can supply different EMF values upon request.
|ASTM||(American Society for Testing and Materials) E 230|
|ANSI||(American National Standard Institute) MC 96.1|
|IEC||(European Standard by the International Electrotechnical Commission 584)-1/2/3|
|DIN||(Deutsche Industrie Normen) EN 60584 -1/2|
|BS||(British Standards) 4937.1041, EN 60584 - 1/2|
|NF||(Norme Française) EN 60584 -1/2 - NFC 42323 - NFC 42324|
|JIS||(Japanese Industrial Standards) C 1602 - C 1610|
|GOST||(Unification of the Russian Specifications) 3044|