Globar non-inductive, high voltage, high power tubular resistors

Non-inductive, high voltage, high energy, high power tubular resistors with ratings up to 165 KV, 164 kJoules and 1,000 watts.

Tubular Resistors - datasheet (PDF document, 560 kB)

Globar® non-inductive, high voltage, high power tubular resistors are available in a wide range of standard sizes, ceramic materials, terminations and mounting hardware.

Electrical specifications for non-inductive tubular resistors
Length and diameter, inches Resistor
type
Resistance available, Ohm (min. to max.) Average power
at 40°C (104°F),
Watts
Peak* energy, Joules Peak* voltage**, Volts
2 x 1/2 884SP 1.0-200 22.5 250 1000
2-1/2 x 3/4 885SP 1.0-130 45 250 1000
885AS...DS 6.0-1200 15 2800 8000
885A 1500-220K 15 750 3750
5 x 3/4 886SP 1.0-330 90 500 4000
886AS..DS 15.0-3300 30 7500 20000
886A 3900-390K 30 1500 10000
6 x 1 887SP 1.0-330 150 1600 4000
887AS...DS 12.0-3300 50 13000 30000
887A 3900-390K 50 6000 12000
6 x 1-1/2 1026AS..DS 5.0-1200 70 30000 30000
8 x 1 888SP 1.0-390 190 2100 6000
888AS..DS 15.0-3900 75 16500 45000
888A 4700-470K 60 7500 15000
8 x 1-1/2 1028AS..DS 6.5-1875 100 46000 45000
12 x 1 889SP 1.0-680 275 3200 10000
889AS..DS 25.0-6800 100 27000 75000
889A 8200-680K 90 12500 25000
12 x 1-1/2 1032AS..DS 9.0-2500 150 75000 75000
18 x 1 890SP 1.0-1000 375 4200 16000
890AS..DS 40.0-10K 150 43000 120000
890A 12K-1M 125 20000 40000
18 x 1-1/2 1038AS..DS 15.0-3800 225 119000 120000
18 x 2 891SP 1.0-450 750 15000 16000
24 x 2 892SP 1.0-600 1000 17500 22000
24 x 1-1/2 1044AS 20.0-4800 300 164000 165000

* Allowable peak energy/voltage will depend on the resistance value.

** Derate by 50% with oil resistant coating on Type AS resistors. Energy ratings are based on pulses <10 milliseconds. Type SP ratings can be substantially greater for longer pulses.