89 hits
Kanthal® AE Product form:Resistance heating wire and resistance wire
Standard:
A ferritic iron-chromium-aluminium alloy (FeCrAl alloy) with exceptional form stability and service life in elements with large coil to wire diameter ratio. It is suitable for use at temperatures up to 1300ºC (2370ºF).
Kanthal® A (Several product forms available)
A ferritic iron-chromium-aluminium alloy (FeCrAl alloy) with high resistivity and good oxidation resistance for use at temperatures up to 1350°C (2460°F).
Cuprothal® 49TC Product form:Resistance heating wire and resistance wire
Standard:
A copper-nickel alloy (CuNi alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures up to 600°C (1110°F).
Nikrothal® 30 Product form:Resistance heating wire and resistance wire
Standard:
An austenitic nickel-chromium alloy (NiCr alloy) for use at temperatures up to 1050°C (1920°F). Nikrothal 30 is characterized by high resistivity and good oxidation resistance.
Nikrothal® 70 (Several product forms available)
An austenitic nickel-chromium alloy (NiCr alloy) for use at temperatures up to 1250°C (2280°F). Nikrothal 70 is characterized by high resistivity and good oxidation resistance.
Standard:
A ferritic iron-chromium-aluminum alloy with addition of Yttrium (FeCrAlY alloy) for use in arc and flame spray systems.
1350 Aluminum Product form:Conductive wire
Standard:
1350 Aluminum has a purity of 99-99.5%. 1350 Al is widely used for disk drive coils, development of tethers with heat-resistant enamels and high-strength bond coatings.
Inv 115 Product form:Strip
Standard:
15/7B Product form:Strip
Standard:
19-7 Product form:Strip
Standard: