Here you can access material datasheets for our wide range of alloys and materials. Contact us if you need more information about our materials.
An austenitic nickel-iron-chromium alloy (NiFeCr alloy) for use in arc and flame spray systems.
1350 Aluminum has a purity of 99-99.5%. 1350 Al is widely used for disk drive coils, development of tethers with heat-resistant enamels and high-strength bond coatings.
A nickel alloy (Ni alloy) with high melting point and good conductivity. R63C is characterized by a low discharge potential as well as good corrosion resistance in carburizing and sulphudizing atmospheres.
Inv 115 is a nickel-iron alloy (NiFe alloy) for use at temperatures up to 600°C (1110°F). The alloy has a moderate constant thermal expansion factor up to 300°C (570°F).
Nicrosil is an austenitic nickel-chromium-silicon alloy (NiCrSi alloy) used for the positive leg of thermocouple type N. It offers a better oxidation resistance in air than type E, J and K thermocouples.
Typical applications for 38-7 include use as resistance strip or as a low expansion component in bimetal thermostats, for example in gas and electric stoves. Its low thermal expansion also makes it useful as structural material where low temperature sensitivity is required, for example as frames for measuring systems, or for parts in mechanical watches.
Typical applications for INV 100 include use as resistance strip or as a low expansion component in bimetal thermostats, for example in gas and electric stoves. Its low thermal expansion also makes it useful as structural material where low temperature sensitivity is required, for example as frames for measuring systems, or for parts in mechanical watches.
Kanthal® AM100 is an advanced heat resistant ferritic iron-chromium-aluminium alloy (FeCrAl alloy) specially developed for additive manufacturing. This allows Kanthal to offer printed products with customized geometries that can be difficult to produce by traditional methods. Examples of products printed with Kanthal® AM100 are heating elements, burner nozzles, and protective shells, fittings and manifolds, etc.
An austenitic nickel-chromium alloy (NiCr alloy) for furnace temperatures up to 1250°C (2280°F).
An austenitic copper-nickel alloy (CuNi alloy) with low resistivity used for the negative leg of the following types of thermocouples and compensating cables: E, J, T and KCB (VX).
Go to page:
Kanthal® is a world-leading brand for products and services in the area of industrial heating technology and resistance materials. Part of the Sandvik Group.
Copyright © Sandvik AB; (publ) SE-734 27 Hallstahammar, Sweden Tel +46 (0)220 21000